Maximum Possible Spin

How can I get the most possible spin on the cue ball?

In general, to get maximum spin, prepare and chalk a good tip, and hit the cue ball as far from center as you can without miscuing (see the miscue resource page for examples and more info). A standard striped ball can be useful for practice because the width of a standard stripe is half the ball’s diameter (NOTE – this is not the case with all ball brands), and the edges of the stripe border the typical miscue limit (at half the ball’s radius from center). Here’s a useful illustration of maximum (100%) spin:

miscue limit and maximum cue tip offset

And here’s a demonstration along with how to verify the stripe width:

For more information, see:

Tip size and shape can also affect the amount of spin you are getting. For more info, see:

Maximum tip-offset considerations also apply to follow and draw shots. For more info, see:

As shown by the following illustration from Patrick Johnson, a shooter with better tip contact point accuracy and precision can safely aim lower on the CB, and typically get more backspin, than a shooter with less accuracy and precision:

miscue limit tip contact point accuracy and precision

For more information about how to achieve maximum draw, see:

To achieve the most effect from sidespin (for example, get the most rebound angle change off a cushion), you want to use a drag shot where you start the CB off with backspin, and the backspin wears off on the way to the cushion (increasing the spin-speed ratio). The problem with hitting below center is that you must decrease the amount of sidespin (tip offset) a little. However, because the drag action slows the cue ball while retaining most of the sidespin, the rebound angle will be larger. For more info, see the drag shot resource page.

Cue weight has an effect on how much spin can be applied. For more info, see:

Some people think low-CB-deflection (LD) shafts or tip type/hardness/brand or chalk brank or other things can help you get more spin on the CB, but this is not the case. For more info see:

Does shaft stiffness have an effect?

Yes. When using a very heavy and/or stiff cue, the maximum tip offset (and maximum spin) possible with a good hit can be more limiting than normal (see optimal cue weight). As shown in the plots on pages 7 and 8 in TP A.30, with a hit close to the miscue limit, the CB might not separate from the tip fast enough. Also, with a stiff shaft (e.g., a carbon fiber shaft) the end of the cue won’t deflect away from the ball as much as normal and will tend to flex back toward the CB faster (see cue vibration for video illustrations). These effects can result in a double hit or push that might not even be directly noticeable; although, the CB will squirt more than expected (as with a miscue shot). The 2nd-to-last shot (before the miscue) in HSV A.106 visually shows how close the tip can come to a double hit even with a typical-weight LD shaft, which is not very stiff. For more info on this topic, see “Coriolis was brilliant … but he didn’t have a high-speed camera – Part IV: maximum cue tip offset” (BD, October, 2005). Another example of this from 2008 testing of a prototype cuttlefishcues carbon fiber shaft showing how a stiff shaft does not deflect away from the CB as much, and returns to the CB quickly, risking a double hit (see the shots with the black shaft in the video). Here’ are some’s a clear examples of the effect:

For many examples of how the cue typically separates from the CB during shots with large tip offset from center, see the slow-motion videos on the miscue resource page.

Dr. Dave keeps this site commercial free, with no ads. If you appreciate the free resources, please consider making a one-time or monthly donation to show your support:

Show Your Support with a Donation